How to set the output frequency to show on the ATV320 display every time drive is powered on?
Issue:
Change the default display for when the drive is powered on to show output frequency.
Product Line:
Altivar Machines, Altivar 320
Environment:
All models and serial numbers
Cause:
Default display is Reference Frequency
Resolution:
Go to Non (1.2 Monitoring) menu, select rFr (output frequency), and press and hold ENT for more than 2 seconds. Display will flash to indicate the change had been made.
To dispaly amperage: Go to NON > select NNO > LCr, ENT for more than 2 seconds
Change the default display for when the drive is powered on to show output frequency.
Product Line:
Altivar Machines, Altivar 320
Environment:
All models and serial numbers
Cause:
Default display is Reference Frequency
Resolution:
Go to Non (1.2 Monitoring) menu, select rFr (output frequency), and press and hold ENT for more than 2 seconds. Display will flash to indicate the change had been made.
To dispaly amperage: Go to NON > select NNO > LCr, ENT for more than 2 seconds
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.