RemoteConnect to SCADAPAck x70 communication protocol and communication link selection
The PC Communication defines the communication protocol and communication link used for communication between a personal computer (PC) running RemoteConnect software and a target controller, SCADAPack 47x or SCADAPAck 57x. To change communication settings:
1. Open RemoteConnect software
2. Open project that has to be downloaded to SCADAPack x70
3. Click the "PC Communication Settings - DNP3 CommDTM
4. Click the "Offline - PC Communication Settings" tab
5. In the "Connection Type" box select PC Communication Type/Protocol
6. In the box "Serial Communication Settings" configure communication port
7. Click the Apply button
1. Open RemoteConnect software
2. Open project that has to be downloaded to SCADAPack x70
3. Click the "PC Communication Settings - DNP3 CommDTM
4. Click the "Offline - PC Communication Settings" tab
5. In the "Connection Type" box select PC Communication Type/Protocol
6. In the box "Serial Communication Settings" configure communication port
7. Click the Apply button
Released for: Schneider Electric Canada
