Are solid neutral assemblies available for ALL heavy duty safety switches? What neutral is used with each switch and what is the terminal lug data?

Issue:
Product Design Features

Product Line:
Heavy Duty Safety Switches

Resolution:
All heavy duty switches will accept a solid neutral assembly with some exceptions. SEE the below solid neutral table and select the neutral based on the amperage of the switch.
NOTES:
1) LOOK AT ALL APPROPRIATE FOOTNOTES UNDER THE TABLE
2) A solid neutral CANNOT be added to the H364DF and HU364DF (NEMA 4X fiberglass reinforced polyester)
3) For older series switches, SEE SWITCH WIRING DIAGRAM

[65] For series not shown in chart refer to the switch wiring diagram

[67] For solid Neutral Assembly Kits for Krydon TM enclosure see Table 3.20 Below.

[68] For Solid Neutral Assembly Kits for Fiberglass Reinforced Ployester enclosures see Table 3.19 Below.

[69] Neutrals CANNOT be installed in 4 or 6 pole switches or Receptable Switches.

[70] See Current ON-LINE Digest or Switch wiring diagram for Current Series of Safety Switch. [71] The following 30 A Series F5-F6 switches use SN0610 or SN0610C: H3612, H3612RB, H3612A, H3612AWK, HU3612, HU3612RB, HU3612A and HU3612AWK.

[72] For 200% neutral, order (2) SN20A Neutral Kits and (1) SN20NI Neutral Jumper Kit (THIS ONLY APPLIES TO THE 200Amp SWITCHES)

Released for: Schneider Electric Canada