Issue:
Protective boots for 9001K and 9001SK operators
Product Line:
30MM push buttons and operators
Environment:
Class 9001 Type K/SK Operators
Resolution:
The boots are part numbers 9001KU1 thru 9001KU8 depending on color required, see table below for selection:
Protective Boots
| For Non-Illuminated | Clear Color for | Type [2] | |
|---|---|---|---|
| Color | Type [2] | ||
| Black | Standard knob selector switch | ||
| Red | Gloved-hand cap for use on standard knob selector switch | ||
| Blue | |||
| Brown | |||
| Green | Standard pilot light and maintained contact push buttons | ||
| Yellow | |||
| Clear | |||
| Clear | Push-to-test and illuminated push button without guard | ||
| (Provides Full Guard) | Illuminated push button with guard | ||
| NOTE: These Type KU protective boots are recommended for very dirty environments or severe hose down, but they are not required for UL Type 4 rating on the Type K operators or UL Type 4 or 4X rating on the Type SK operators. The K1 wrench (see Wrenches for Type K and SK Operators) is required for installation of these boots. | |||
Released for:Schneider Electric Canada
