How to set up BACnet communication parameters in an EM3560 meter
Issue
A user would like to enter the BACnet communication parameters in an EM3500 series meter.
Product Line
EM3560, EM3560A
Resolution
The user needs to enter only 3 parameters, the MAC address, the Kbaud rate, and the Instance ID.
- Navigate to the S BAC (set BACnet) Setup screen (see section A of the installation guide ).
- Press -> to go to the MAC screen and through the address digits. Use + or – to select the BACnet MAC address (default is 001).
- Press -> to accept the value and go to the KBAUD screen. Use + or – to select the baud rate (default is 76.8K).
- Press -> to go to the ID1 screen and enter the upper four digits of the Device Instance. Use + or – to select the ID digits (default is a pseudo-random number).
- Press -> to accept the value and go to the ID2 screen, and through the lower three digits of the Device Instance. Use + or – to select the ID digits (default is a pseudo-random number).
- Press -> to accept the value and go back to the S BAC screen.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.