Can the VW3A1111 HMI be connected directly to an Ethernet network on ATV600 or ATV900 drives?
Resolution:
No, the VW3A1111 remote HMI (Graphic Display Terminal) cannot be connected directly to an Ethernet network.
This HMI is designed to communicate only through the drive’s built-in Modbus port, not via Ethernet.
✅ Key Details
- Supported communication: Modbus serial connection via the drive
- Default HMI communication settings:
- Baud rate: 19.2 kbps
- Format: 8E1 (8 data bits, even parity, 1 stop bit)
- Not supported: Direct Ethernet network connection
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric Canada
