Is It possible to update BMENUA0100 firmware via M580 CPU ?
Yes, It is possible to update the BMENUA0100 module firmware via the SERVICE port of the M580 CPU:
1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)
2- A user account with "Installer" role must be created via the module webpage ;
3- With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:
4- Use the user account with the "installer" role previously created:
5- If it was the first time you connect to the module, It could ask to trust its certificate:
6- Select the firmware to upload:
7- Launch the update and follow the steps:
Best Regards.
1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)
2- A user account with "Installer" role must be created via the module webpage ;
3- With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:
4- Use the user account with the "installer" role previously created:
5- If it was the first time you connect to the module, It could ask to trust its certificate:
6- Select the firmware to upload:
7- Launch the update and follow the steps:
Best Regards.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.