Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais

I-Line Combo Panelboard

Power Distribution Panelboard

Part of Line Series

Power Distribution Panelboard

I-Line Combo Panelboard schneider.label Power Distribution Panelboard
  • Features

    The I-Line™ Combo Panelboard saves time and space by combining I-Line and NQ/NF sections in one panelboard. The I-Line Combo Panelboard features a smart, space-saving design for fast installation and a smaller footprint, all with the proven reliability trusted for decades. And since you install one panelboard instead of two, you save on installation time, labor expenses, and material costs.

    Explore I-Line Combo Panelboard in 3D animation


    • 600y/347 Vac, 48 Vdc maximum
    • 1200 A maximum main circuit breaker or 800 A maximum main lug
    • 1200 A maximum branch circuit breaker
    • 200,000 A SCCR when using current limiting main or branch circuit breakers
    • Fully rated and series rated systems available
    • Interiors available in plated copper or aluminum bus
    • Complete line of cULus listed interiors with 200% rated neutrals for non-linear loads
    • Sub-feed or through-feed lugs through 1200 A
    • Interiors accept plug-on thermal magnetic or  electronic trip branch circuit breakers
    • Branch circuit breakers have no loose mounting hardware and are the fastest in the industry to install with only a screw driver
    • Lighting section interiors accept both bolt-on and plug-on branch circuit breakers
    • Branch circuit breakers are simple to rearrange in the field, limited restrictions on mounting locations
    • 100 kA – 240 kA Surge Current, field installable plug-in SPD units
    • Available with or without door, or with hinged trim
    • Broad range of field installable kits available from stock
    • Bolt-on branch circuit breakers attach with captive screws
    • Available in Single Enclosure (26” and 32” width) or Duplex Enclosure (44” width)
    • A screwdriver is the only tool you need to install these breakers, which saves valuable installation time.
    • Uses the classic Square D™ I-Line and NQ/NF layout with a familiar feel and ensures no time lost in learning how to install.
    • The Single I-Line Combo Panelboard is available in 26” and 32” widths. Order the 32” if your project requires more I-Line mounting space.
    • The Duplex I-Line Combo Panelboard is available in 44” widths, either in two hard-bussed lighting sections or one hard-bussed lighting section and open mounting space for field installable options.
    • The I-Line power section mounts horizontally, and is available in 18-, 22.5- or 31.5-inch configurations.


    • Requires up to 40 percent less space than a traditional I-Line and NQ and/or NF lighting panelboards configuration.


Reach Us

Have a question, complaint or is there some feedback you’d like to send us to make your experience with Schneider Electric better?

Where to Buy

A simple tool to locate easily your nearest Schneider Electric distributor


Start here for access to our Knowledge Base to get answers to over one hundred thousand questions online in seconds.