1. SESU version V2.5.0.0 is required before starting the Controller Assistant update (If a previous version is installed on your PC, start by the SESU update).
2. Open Schneider Electric Software Update (SESU)
3. In Machine Expert Installer, select Controller Assistant V19.2.2.0 (default selection is 43.17…)
4. Launch the Controller Assistant install by the “Next” button.
Publikováno pro:Schneider Electric Česká republika
1. SESU version V2.5.0.0 is required before starting the Controller Assistant update (If a previous version is installed on your PC, start by the SESU update).
2. Open Schneider Electric Software Update (SESU)
3. In Machine Expert Installer, select Controller Assistant V19.2.2.0 (default selection is 43.17…)
4. Launch the Controller Assistant install by the “Next” button.
Publikováno pro:Schneider Electric Česká republika
