Does PacDrive 3 support the automatic commissioning of a ProfiNet IO system/automatic device replacement?| Schneider Electric Česká republika

Jak vám dnes můžeme pomoci?

Does PacDrive 3 support the automatic commissioning of a ProfiNet IO system/automatic device replacement?

Yes, with EcoStruxure MachineExpert V2.0 a new ProfiNet driver was implemented, which now also supports LLDP (Link Layer Discovery Protocol) and the topology editor. It is now possible to configure the network topology in the ProfiNet-IO controller so that the LMC can automatically detect all non-configured devices during startup and configure them accordingly.

Publikováno pro:Schneider Electric Česká republika

Publikováno dne:2. 1. 2023Datum poslední úpravy:2. 1. 2023

Does PacDrive 3 support the automatic commissioning of a ProfiNet IO system/automatic device replacement?

Publikováno pro:Schneider Electric Česká republika

Publikováno dne:2. 1. 2023Datum poslední úpravy:2. 1. 2023

Řada:

EcoStruxure Machine Expert

PacDrive 3

Logic Motion Controllers PacDrive LMC Pro and LMC Eco

Řada:

EcoStruxure Machine Expert

PacDrive 3

Logic Motion Controllers PacDrive LMC Pro and LMC Eco

Řada:

EcoStruxure Machine Expert

PacDrive 3

Logic Motion Controllers PacDrive LMC Pro and LMC Eco

Řada:

EcoStruxure Machine Expert

PacDrive 3

Logic Motion Controllers PacDrive LMC Pro and LMC Eco

Publikováno pro:Schneider Electric Česká republika

Publikováno pro:Schneider Electric Česká republika

Potřebujete pomoc?

Začnete zde!

Kontaktujte podporu

Kde nakoupit?

Projděte FAQ