Tere tulemast ettevõtte Schneider Electric veebisaidile

Võite külastada meie teiste riikide või piirkondade veebisaite või avada meie ülemaailmse veebisaidi.

Valige enda asukoht

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
Kuva kõik   Altivar 71 Plus
ATV71EXC5C16N4 Pildi tuvastamine Schneider Electric
Tootmisest maas


ATV71EXC5C16N4 Pildi tuvastamine Schneider Electric
Tootmisest maas

enclosed variable speed drive ATV71 Plus - 160 kW - 400 V - IP54

Näita veel tunnuseid
Kaubanduslik olek
Tootmine lõpetatud 12 märts 2021
Teeninduse lõpp 12 märts 2021
ATV71EXC5C16N4  pole välja vahetatud. Lisateabe saamiseks võtke ühendust klienditoega.
Suurim võrreldavate toodete arv on 4. Eemaldage juba lisatud tooted.

  • Main
    range of product
    Altivar 71 Plus
    product or component type
    Variable speed drive
    device short name
    ATV71 Plus
    product destination
    Asynchronous motors
    Synchronous motors
    product specific application
    Complex, high-power machines
    assembly style
    In floor-standing enclosure compact version
    product composition
    A switch and fast-acting semi-conductor fuses
    An IP65 remote mounting kit for graphic display terminal
    ATV71HC16N4D drive on heatsink
    Terminals/bars for motor connection
    A line choke
    A wired ready-assembled Sarel Spacial 6000 enclosure
    EMC filter
    network number of phases
    3 phases
    rated supply voltage
    380...415 V +/- 10 %
    supply voltage limits
    342…457 V
    supply frequency
    50...60 Hz +/- 5 %
    network frequency
    47.5...63 Hz
    motor power kW
    160 kW 380...415 V
    line current
    277 A 400 V / 160 kW
    apparent power
    190 kVA 400 V / 160 kW
    prospective line Isc
    100 kA with external fuses
    continuous output current
    314 A 2.5 kHz, 400 V / 160 kW
    maximum transient current
    471 A 60 s / 160 kW
    speed drive output frequency
    0…500 Hz
    nominal switching frequency
    2.5 kHz
    switching frequency
    2.5...8 kHz with derating factor
    2...8 kHz adjustable
    speed range
    1…100 in open-loop mode, without speed feedback
    speed accuracy
    +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn
    +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
    torque accuracy
    +/- 15 % in open-loop mode, without speed feedback
    +/- 5 % in closed-loop mode with encoder feedback
    transient overtorque
    170 % of nominal motor torque +/- 10 % 60 s
    220 % of nominal motor torque +/- 10 % 2 s
    braking torque
    <= 150 % with braking or hoist resistor
    30 % without braking resistor
    asynchronous motor control profile
    Voltage/frequency ratio - Energy Saving, quadratic U/f
    Flux vector control with sensor, standard
    Flux vector control without sensor, standard
    Flux vector control without sensor, ENA (energy Adaptation) system
    Voltage/frequency ratio, 5 points
    Voltage/frequency ratio, 2 points
    Flux vector control without sensor, 2 points
    synchronous motor control profile
    Vector control without sensor, standard
    Vector control with sensor, standard
    regulation loop
    Adjustable PI regulator
    motor slip compensation
    Not available in voltage/frequency ratio (2 or 5 points)
    Automatic whatever the load
    overvoltage category
    Class 3 EN 50178
    local signalling
    Operation function, status and configuration - mounted in the front door LCD display unit
    output voltage
    <= power supply voltage
    Electrical between power and control
    type of cable for external connection
    IEC cable 40 °C, copper 70 °C / PVC
    electrical connection
    Terminal - 2.5 mm² / AWG 14 AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) entry from the bottom
    Terminal M10 - 2 x 150 mm² L1/R, L2/S, L3/T) entry from the bottom
    Terminal M12 - 2 x 240 mm² U/T1, V/T2, W/T3) entry from the bottom
    motor recommanded cable cross section
    3 (3 x 50) mm²
    short-circuit protection
    400 A fuse protection gI - power supply upstream
    External supply 24 V DC 19…30 V), <1 A
    Internal supply for reference potentiometer 10 V DC 10…11 V), <10 mA
    Internal supply 24 V DC 21…27 V), <100 mA
    analogue input number
    analogue input type
    AI2 software-configurable voltage 0...10 V DC, 24 V max 30000 Ohm 1,5…2,5 ms 11 bits
    AI1-/Al1+ bipolar differential voltage +/- 10 V DC, 24 V max 1,5…2,5 ms 11 bits + sign
    AI2 software-configurable current 0...20 mA/4...20 mA 250 Ohm 1,5…2,5 ms 11 bits
    analogue output number
    analogue output type
    Software-configurable voltage AO1) 0...10 V DC - 470 Ohm 1,5…2,5 ms 10 bits
    Software-configurable current AO1) 0...20 mA/4...20 mA - 500 Ohm 1,5…2,5 ms 10 bits
    discrete output number
    discrete output type
    Configurable relay logic R1A, R1B, R1C)NO/NC - 6.5...7.5 ms - 100000 cycles
    Configurable relay logic R2A, R2B)NO - 6.5...7.5 ms - 100000 cycles
    minimum switching current
    3 mA 24 V DC configurable relay logic)
    maximum switching current
    5 A 250 V AC resistive - cos phi = 1 R1, R2)
    5 A 30 V DC resistive - L/R = 0 ms R1, R2)
    2 A 250 V AC inductive - cos phi = 0.4 R1, R2)
    2 A 30 V DC inductive - L/R = 7 ms R1, R2)
    discrete input number
    discrete input type
    Programmable LI1...LI5) 24 V DC <= 30 V level 1 PLC 3.5 kOhm 1,5…2,5 ms)
    Switch-configurable LI6) 24 V DC <= 30 V level 1 PLC 1.5 kOhm 1,5…2,5 ms)
    Safety input PWR) 24 V DC <= 30 V 1.5 kOhm
    discrete input logic
    Positive logic (source) LI1...LI6), 0...5 V, 11...30 V
    Negative logic (sink) LI1...LI6), 16...30 V, 0...10 V
    Positive logic (source) PWR), 0...2 V, 17...30 V
    acceleration and deceleration ramps
    S, U or customized
    Automatic adaptation of ramp if braking capacity exceeded, by using resistor
    Linear adjustable separately from 0.01 to 9000 s
    braking to standstill
    By DC injection
    protection type
    Against exceeding limit speed drive
    Against input phase loss drive
    Break on the control circuit drive
    Input phase breaks drive
    Line supply overvoltage drive
    Line supply undervoltage drive
    Overcurrent between output phases and earth drive
    Overheating protection drive
    Overvoltages on the DC bus drive
    Short-circuit between motor phases drive
    Thermal protection drive
    Input phase breaks motor
    Power removal motor
    Thermal protection motor
    dielectric strength
    3535 V DC between earth and power terminals
    5092 V DC between control and power terminals
    insulation resistance
    > 1 mOhm 500 V DC for 1 minute to earth
    frequency resolution
    Analog input 0.024/50 Hz
    Display unit 0.1 Hz
    communication port protocol
    connector type
    1 RJ45 on front face)Modbus
    1 RJ45 on terminal)Modbus
    Male SUB-D 9 on RJ45CANopen
    physical interface
    2-wire RS 485 Modbus
    transmission frame
    RTU Modbus
    transmission rate
    4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal
    9600 bps, 19200 bps Modbus on front face
    20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen
    data format
    8 bits, 1 stop, even parity Modbus on front face
    8 bits, odd even or no configurable parity Modbus on terminal
    type of polarization
    No impedance Modbus
    number of addresses
    1…247 CANopen
    1…247 Modbus
    method of access
    Slave CANopen
    option card
    Communication card CC-Link
    Communication card DeviceNet
    Communication card Ethernet/IP
    Communication card Fipio
    Communication card Interbus-S
    Communication card Modbus Plus
    Communication card Modbus/Uni-Telway
    Communication card Profibus DP
    Communication card Profibus DP V1
    Communication card Modbus TCP/IP
    Controller inside programmable card
    Basic I/O extension card
    Extended I/O extension card
    Encoder interface cards
    options for enclosure configuration
    Safe standstill power circuit
    PTC relay power circuit
    Pt100 relay power circuit
    Insulation monitoring power circuit
    Design for IT networks power circuit
    External 230 V supply terminals power circuit
    Buffer voltage 24 V DC power supply power circuit
    External 24 V DC supply terminals power circuit
    Enclosure lighting power circuit
    Key switch (local/remote) power circuit
    Motor heating power circuit
    External motor fan power circuit
    Voltmeter power circuit
    Door handle for main switch power circuit
    Circuit breaker power circuit
    Line contactor power circuit
    Ammeter power circuit
    Enclosure heating power circuit
    Motor choke power circuit
    Cable entry via the top power circuit
    Enclosure plinth power circuit
    Braking unit power circuit
    Door handle for circuit breaker power circuit
    Control terminals control circuit
    Adaptor for 115 V logic inputs control circuit
    Relay output C/O control circuit
    Isolated amplifier control circuit
    operating position
    Vertical +/- 10 degree
    colour of enclosure
    Light grey RAL 7035)
    2262 mm
    600 mm
    642 mm
    net weight
    360 kg
    electromagnetic compatibility
    1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
    Conducted radio-frequency immunity test level 3 IEC 61000-4-6
    Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
    Electrostatic discharge immunity test level 3 IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
    Voltage dips and interruptions immunity test IEC 61000-4-11
    pollution degree
    3 EN/IEC 61800-5-1
    IP degree of protection
    vibration resistance
    0.6 gn 10…200 Hz)EN/IEC 60068-2-6
    1.5 mm 3…10 Hz)EN/IEC 60068-2-6
    3M3EN/IEC 60721-3-3
    shock resistance
    4 gn 11 ms EN/IEC 60068-2-27
    3M2 EN/IEC 60721-3-3
    noise level
    65 dB 86/188/EEC
    environmental characteristic
    Without condensation 3C2 IEC 60721-3-3
    Without condensation 3K3 IEC 60721-3-3
    Without condensation 3S2 IEC 60721-3-3
    relative humidity
    0…95 %
    ambient air temperature for operation
    0…40 °C (without derating)
    40…50 °C with current derating of 1.2 % per °C)
    ambient air temperature for storage
    −25…70 °C
    volume of cooling air
    800 m3/h
    operating altitude
    <= 1000 m without derating
    1000...3000 m with current derating 1 % per 100 m
    EN 55011 class A group 2
    EN/IEC 61800-5-1
    EN 61800-3 environments 2 category C3
    EN 61800-3 environments 1 category C3
    EN/IEC 61800-3
    product certifications
    Packing Units
    Pakk 1 kaal
    340,000 kg
    Pakk 1 kõrgus
    21,600 dm
    Pakk 1 laius
    6,600 dm
    Pakk 1 pikkus
    6,160 dm
    Contractual warranty
    18 months