How to link to a module's setup registers in Power Monitoring Expert Designer.
Issue
User wants to link an input of a module to a setup register of another module in PME Designer.
Product Line
Power Monitoring Expert 9.x
Power Monitoring Expert 2020
Power Monitoring Expert 2021
Power Monitoring Expert 2022
Power Monitoring Expert 2023
Power Monitoring Expert 2024
Environment
Power Monitoring Expert Designer Application
Cause
Designer allows linking module inputs to outputs, but linking directly to setup registers requires a specific method.
Resolution
To link an input of one module to a setup register of another module in Designer:
- In Designer, select the input of the module you want to link.
- Hold down Ctrl and left-click on the output of the module that contains the setup register.
- A list of setup registers will appear.
- Choose the desired setup register.
- The link is now established.
Recommendation:
If you are using an older version of PME, consider upgrading to the latest version for improved protocol support and security. For assistance with integration or upgrades, contact Schneider Electric Technical Support at: pmo-psup@se.com
Julkaistu: Schneider Electric Suomi
