Issue:
Bottom feed and top feed installation of a NF MLO panelboard.
Product Line:
NF Panelboard
Environment:
Application
Cause:
Clarifying
Resolution:
Yes. This can be accomplished by rotating the interior assembly 180 degrees. Detach the line and load end covers from the branch deadfront, rotate the branch section 180 degrees and re-attach line and load end covers. (This is necessary to achieve proper orientation of deadfront labels.)
Bottom feed and top feed installation of a NF MLO panelboard.
Product Line:
NF Panelboard
Environment:
Application
Cause:
Clarifying
Resolution:
Yes. This can be accomplished by rotating the interior assembly 180 degrees. Detach the line and load end covers from the branch deadfront, rotate the branch section 180 degrees and re-attach line and load end covers. (This is necessary to achieve proper orientation of deadfront labels.)
