Which operators can be mounted in a XACA pendant station?
Issue:
Compatible operators for XACA pendant station
Product Line:
Harmony XAC
Environment:
Pendant control station XACA
Resolution:
All ZA2 non-illuminated operators can be mounted in the cover or the bottom except for 60mm mushroom buttons. Also 3 position selector switches can not be used in the bottom. There are no contact blocks that will work with the 3 position selector switch in the bottom. Pilot lights and the XACA booted operators can be mounted in the cover only.
Compatible operators for XACA pendant station
Product Line:
Harmony XAC
Environment:
Pendant control station XACA
Resolution:
All ZA2 non-illuminated operators can be mounted in the cover or the bottom except for 60mm mushroom buttons. Also 3 position selector switches can not be used in the bottom. There are no contact blocks that will work with the 3 position selector switch in the bottom. Pilot lights and the XACA booted operators can be mounted in the cover only.
Publicado para: Schneider Electric Mexico
¿Necesitas ayuda?
Selector de productos
Encuentra rápida y fácilmente los productos y accesorios adecuados para tus aplicaciones.
Pedir presupuesto
Comienza tu consulta de ventas en línea y un experto se pondrá en contacto contigo.
¿Dónde comprar?
Encuentra fácilmente el distribuidor de Schneider Electric más cercano a ti.
Centro de ayuda
Encuentra recursos de soporte para todas tus necesidades en un solo lugar.