Issue:
When should the protective tape over the arc chutes be removed?
Product Line:
Circuit Breakers
Environment:
Masterpact NT/NW and SEF/SED
Resolution:
The protective tape should be removed after installation. Protective tape is placed over arc vents to keep debris out of circuit breaker. Do not remove tape prior to installation. If the tape is not removed and left on after installation, there is no serious concern; the tape has a minor effect on heat. If the breaker needs to open due to a fault condition the tape will simply blow off.
When should the protective tape over the arc chutes be removed?
Product Line:
Circuit Breakers
Environment:
Masterpact NT/NW and SEF/SED
Resolution:
The protective tape should be removed after installation. Protective tape is placed over arc vents to keep debris out of circuit breaker. Do not remove tape prior to installation. If the tape is not removed and left on after installation, there is no serious concern; the tape has a minor effect on heat. If the breaker needs to open due to a fault condition the tape will simply blow off.
Publicado para: Schneider Electric Mexico
¿Necesitas ayuda?
Selector de productos
Encuentra rápida y fácilmente los productos y accesorios adecuados para tus aplicaciones.
Pedir presupuesto
Comienza tu consulta de ventas en línea y un experto se pondrá en contacto contigo.
¿Dónde comprar?
Encuentra fácilmente el distribuidor de Schneider Electric más cercano a ti.
Centro de ayuda
Encuentra recursos de soporte para todas tus necesidades en un solo lugar.
