If the LED blinking pattern has stopped on an AF or AFGF breaker, can it be re-initiated to determine the last trip?
Issue:
How can the LED on the AF and AFGF breakers be re-initiated to determine the cause of the last trip?
Product Line:
QO and HOM arc fault and dual function breakers
Resolution:
There are two ways to re-initiate the LED blinking pattern:
1) Do a quick press and release of the test button (holding down will trip the breaker)
2) The LED will re-initiate its blinking pattern when the breaker is turned on
How can the LED on the AF and AFGF breakers be re-initiated to determine the cause of the last trip?
Product Line:
QO and HOM arc fault and dual function breakers
Resolution:
There are two ways to re-initiate the LED blinking pattern:
1) Do a quick press and release of the test button (holding down will trip the breaker)
2) The LED will re-initiate its blinking pattern when the breaker is turned on
Publicado para: Schneider Electric Mexico
¿Necesitas ayuda?
Selector de productos
Encuentra rápida y fácilmente los productos y accesorios adecuados para tus aplicaciones.
Pedir presupuesto
Comienza tu consulta de ventas en línea y un experto se pondrá en contacto contigo.
¿Dónde comprar?
Encuentra fácilmente el distribuidor de Schneider Electric más cercano a ti.
Centro de ayuda
Encuentra recursos de soporte para todas tus necesidades en un solo lugar.