What components are included in the PM8000 hardware kits?

Issue
What is included in the PM8000 hardware kits?

Product Line
PM8000 Series Meters:

Environment
PM8000 series Power Meter hardware kit components

Resolution

Note: Purchase the correct PM8000 Kit.  You cannot purchase the single components from the kit.

METSEPM8000SK        Voltage and current sealing kit
METSEPMAK                Mounting adapter kit for remote display and DIN meter
METSEPM8HWK          PM8000 series input connector, CT screws and panel mounting hardware, Hardware Kit Replacement
METSEPM8RDHWK     Mounting & connecting hardware kit for remote display PM89RD

Breakdown of components in the PM8000 hardware accessory kits:

Description	Component Qty
METSEPM8000SK
METER SEALING KIT, PM8000/ION7400 - Welmec Ver	1
CURRENT INPUT TERMINAL GUARD, PM8000	1
SEAL, VOLTAGE AND PSU INPUTS, PM8XXX	1
Description	Component Qty
METSEPM8HWK
PLUG, 2 PIN, 7.62 PITCH, BLACK PSU INPUT CONNECTOR	1
PLUG, 4 PIN, 7.62 PITCH, BLACK VOLTAGE INPUT CONNECTOR	1
PLUG, 2 PIN, 5.08 PITCH, BLACK KY INPUT CONNECTOR	1
PLUG, 6 PIN, 5.08 PITCH, BLACK DIG IN CONNECTOR	1
PLUG, 4 PIN, 5.08 PITCH, BLACK RS485 CONNECTOR	1
Description	Component Qty
METSEPM8RDHWK
PM8XXX RMD GASKET FOR REARCASE	1
RD96 RMD ACCESSORY ASSY	1
Description	Component Qty
METSEPMAK
METER ANSI KIT, PM8000	1
CABLE ASSEMBLY 2 X RJ25, 0.3 METER	1
PM8000, ANSI KIT SUBASSY, BAGGED	1
SCREW, 1/4-20 X 1/2, STEEL, ZINC PLATED, TRUSS, PH3	2
SCREW, M3.5 X .6 X 8MM, PAN HEAD, ZP, PH	4
NUT, KEPS, 10-32, STEEL, ZINC PLATED	4
WASHER, FLAT, .195" ID X .375" OD X .040	4
END CLIP, TERM BLK, DIN RAIL, PLASTIC,W/LOCKING SCREW,42MM L	2
INSERT, ANSI 4" Back-To-Back Adapter, PM8000	1
PLATE, ADPATER, ANSI 4 TO 30MM D	1
RETRO-FIT ADAPTER, WEDGE	1
DIN RAIL, PERF, 35mm X 7.5mm X 200mm	1
ANSI 4 INCH ADAPTER BRACKET, ASSY	1
GSKT, PNL, PM8000 RMD, ANSI 4	2
RETRO-FIT ADAPTER, PANEL GASKET	2
0.3M NETWORK WIRE	1