Issue:
Is control voltage required for the LU9GC3 Modbus splitter box?
Product Line:
LU9GC3 Modbus splitter box
Environment:
Products sold and used in United States
Cause:
Control Supply
Resolution:
No. This device is strictly passive and pulls voltage from other source through the RJ45 cables.
**LU9GC3 is a Splitter which only allows for a Single Master, this is not equivalent to, and does not replace, the PXP3148, Port Expander, which Schneider Electric no longer offers.
Connecting an HMI and Modbus Communications to a Drive or Softstart which has only one Modbus Port, requires a Port Expander.
Alternatively, for Monitoring only, a TeSys T can be used.
Is control voltage required for the LU9GC3 Modbus splitter box?
Product Line:
LU9GC3 Modbus splitter box
Environment:
Products sold and used in United States
Cause:
Control Supply
Resolution:
No. This device is strictly passive and pulls voltage from other source through the RJ45 cables.
**LU9GC3 is a Splitter which only allows for a Single Master, this is not equivalent to, and does not replace, the PXP3148, Port Expander, which Schneider Electric no longer offers.
Connecting an HMI and Modbus Communications to a Drive or Softstart which has only one Modbus Port, requires a Port Expander.
Alternatively, for Monitoring only, a TeSys T can be used.
Publisert for: Schneider Electric Norway
Trenger du hjelp?
Start her!
Finn svar nå. Søk etter en løsning på egen hånd, eller kontakt en av våre eksperter.
Kontakt kundestøtten
Ta kontakt med kundeteamet vårt for mer informasjon, teknisk støtte, hjelp med klager og mer.
Hvor kan du handle?
Finn din nærmeste Schneider Electric-distributør enkelt.
Bla gjennom ofte stilte spørsmål (FAQ)
Få svarene du trenger ved å se etter emnerelaterte ofte stilte spørsmål (FAQ).
Kontakt salgsavdelingen
Start salgsforespørselen på Internett, så blir du kontaktet av en ekspert.
