If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Question

Accepted Answer

If using a display remote device, a long reset (>5s) is enough.If using a LED remote device, the configuration SW is mandatory.

If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Released for: Schneider Electric New Zealand

Products

Support

Company

Quick Links

Partners

Sustainability

Events

Insights
opens new tab

If the customer wants to change the bridge with keeping its Remote, is it enough to switch it OFF and then to switch it ON in order to find the Base linked to the other bridge he wants to drive. Is it right ?

Released for: Schneider Electric New Zealand

Products

Support

Company

Quick Links

Partners:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Sustainability:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Events:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Insights:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Partners

Sustainability

Events

Insights
opens new tab