Issue:
ATS48 factory reset
Product Line:
Altistart 48
Resolution:
Programming menu:
RDY arrow down to
DRC menu
FCS setting set this to Yes, and hold it for 3 seconds.
Complete now your soft starter is reset back to the factory settings.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
ATS48 factory reset
Product Line:
Altistart 48
Resolution:
Programming menu:
RDY arrow down to
DRC menu
FCS setting set this to Yes, and hold it for 3 seconds.
Complete now your soft starter is reset back to the factory settings.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Released for:Schneider Electric New Zealand
