Does the "PMESWT0100" a modbus master or a modbus slave?

Question

Accepted Answer

The weighing module "PMESWT0100" is able to manage an HMI for monitoring / adjustment.
The HMI is connected to the "PMESWT0100" through a RS485 bus. The protocol which is used is Modbus.
The HMI is master on the RS485 bus and the "PMESWT0100" is slave. We adjust the slave address of the module through the DTM available in the software "UnityPro".

Does the "PMESWT0100" a modbus master or a modbus slave?

Released for: Schneider Electric New Zealand

Products

Support

Company

Quick Links

Partners

Sustainability

Events

Insights
opens new tab

Does the "PMESWT0100" a modbus master or a modbus slave?

Released for: Schneider Electric New Zealand

Products

Support

Company

Quick Links

Partners:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Sustainability:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Events:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Insights:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Partners

Sustainability

Events

Insights
opens new tab