Issue

A user would like to enter the BACnet communication parameters in an EM3500 series meter.

Product Line

EM3560, EM3560A

Resolution

The user needs to enter only 3 parameters, the MAC address, the Kbaud rate and the Instance ID.

1. Navigate to the S BAC (set BACnet) Setup screen (see section A of the installation guide ).
2. Press -> to go to the MAC screen and through the address digits. Use + or – to select the BACnet MAC address (default is 001).
3. Press -> to accept the value and go to the KBAUD screen. Use + or – to select the baud rate (default is 76.8K).
4. Press -> to go to the ID1 screen and through the upper four digits of the Device Instance. Use + or – to select the ID digits (default is a pseudo-random number).
5. Press -> to accept the value and go to the ID2 screen and through the lower three digits of the Device Instance. Use + or – to select the ID digits (default is a pseudo-random number).
6. Press -> to accept the value and go back to the S BAC screen.

Released for:Schneider Electric New Zealand