Why is their no display on the VIP400 relay
Please note, the VIP400 is a stand alone protection relay powered by its current sensors - when current is present in the MV network, the protections and the display work and it is possible to enter settings and view measurements - the VIP operates at a pickup current value as mentioned in the table below.
When no current is flowing through the circuit breaker or when the current is too low, the VIP is off and nothing appears on its display. If current appears, the protection functions are activated and trip the circuit breaker or not, according to the settings. The additional time for the VIP relay to start when current appears is called the pick up time and is mentioned in the table below.
Released for: Schneider Electric New Zealand
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.