Title
Global Data service on an Unity Momentum 171CBU98091 PLC
Issue
Global Data service on an Unity Momentum 171CBU98091 PLC
Product Line
Unity Momentum
Environment
Control Expert v14 or higher
Cause
N/A
Resolution
Information on setting up the Global Data service on an Unity Momentum 171CBU98091 PLC is available in the Unity Momentum User manual. (Pages 119 to 122 explain the Global Data service setup.)
The basic steps to perform in your program for the Global Data service is to assign a Global Data multicast IP address/Group Name in the Network properties section and configure the global variables properties.
For your Global Data variable you need to select either to PUB (publish) or SUB (subscribe), assigned a Group Name (setup in the network properties section) and enter a unique ID number. (see page 122). The Global Data protocol is a Schneider Electric proprietary capability.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Publicado para: Schneider Electric Portugal
Precisa de ajuda?
Ferramenta de seleção de produtos
Encontre rápida e facilmente os produtos e acessórios certos para as suas aplicações.
Obter um Orçamento
Inicie o seu pedido de contacto online e um especialista irá contactá-lo.
Onde adquirir?
Encontre facilmente o distribuidor mais próximo da Schneider Electric perto de si.
Centro de ajuda
Encontre recursos de apoio para todas as suas necessidades, num único local.
