Is the ZBZ58 compatible with Harmony XALK control stations ?
The ZBZ58 bellows is not designed to be installed with a ZB4BZ1905 guard. Installing the bellows together with the guard may cause difficulties for the emergency stop head to automatically return to its initial position after reset. For this reason, such an installation is not recommended.
I have tested other guards as well, but unfortunately none of them is wide enough to allow proper operation of the emergency stop pushbutton when used with a bellows.
Publicado para: Schneider Electric Portugal
Precisa de ajuda?
Ferramenta de seleção de produtos
Encontre rápida e facilmente os produtos e acessórios certos para as suas aplicações.
Obter um Orçamento
Inicie o seu pedido de contacto online e um especialista irá contactá-lo.
Onde adquirir?
Encontre facilmente o distribuidor mais próximo da Schneider Electric perto de si.
Centro de ajuda
Encontre recursos de apoio para todas as suas necessidades, num único local.