Why does my Smart UPS Modular Ultra show "Unknown UPS internal error [3B7D-00A0]" on the display?
Issue:
Product Line:
Environment:
Resolution:
This specific message occurs when the Redundant Intelligence Module (RIM) is initializing after power up. In later versions of the NMC/Display firmware, the messaging is changed to "RIM initializing, Do not remove MIM". Please upgrade the NMC/Display firmware to SUCAN 2.5.1.3 to see update messaging. You can upgrade the firmware by following this FAQ: https://www.apc.com/us/en/faqs/FAQ000261841/
After performing a UPS Firmware upgrade, removing and installing the Intelligence Modules, or when the UPS is booting up from a brains dead, you may see the display show "Unknown UPS internal error [3B7D-00A0]".
Product Line:
Smart UPS Modular Ultra
Environment:
All models, all serial numbers
Resolution:
This specific message occurs when the Redundant Intelligence Module (RIM) is initializing after power up. In later versions of the NMC/Display firmware, the messaging is changed to "RIM initializing, Do not remove MIM". Please upgrade the NMC/Display firmware to SUCAN 2.5.1.3 to see update messaging. You can upgrade the firmware by following this FAQ: https://www.apc.com/us/en/faqs/FAQ000261841/
Released for: Schneider Electric Saudi Arabia
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.