This video describes the procedure to install the firmware and web page files to a 170ENT11001 Ethernet Adapter that are with Momentum IO bases.
These instructions pertain to the RoHs version Ethernet Communication Adapters only. Since the part number is the same for both a RoHs and non-RoHs communication adapter, a RoHs compliant 170ENT11001 is identified by adapters laser marked with an SV at v1.10 or higher. Non-Rohs versions will always have an Exec version less than 1.10. There are no other physical differences between the two adapters.
These instructions pertain to the RoHs version Ethernet Communication Adapters only. Since the part number is the same for both a RoHs and non-RoHs communication adapter, a RoHs compliant 170ENT11001 is identified by adapters laser marked with an SV at v1.10 or higher. Non-Rohs versions will always have an Exec version less than 1.10. There are no other physical differences between the two adapters.
Publicerad för: Schneider Electric Sverige
