To do the check within the software, please click on the Help on the top menu
then click on about ecostruxure control expert
on the new window that appear, there should be a section calls Integrity Check
please click on the perform self-test button to run the test
after the test is done, you will be presented with this final result screen showing the status of all the components that was involved in the test.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Publicerad för:Schneider Electric Sverige
