Title
Global Data service on an Unity Momentum 171CBU98091 PLC
Issue
Global Data service on an Unity Momentum 171CBU98091 PLC
Product Line
Unity Momentum
Environment
Control Expert v14 or higher
Cause
N/A
Resolution
Information on setting up the Global Data service on an Unity Momentum 171CBU98091 PLC is available in the Unity Momentum User manual. (Pages 119 to 122 explain the Global Data service setup.)
The basic steps to perform in your program for the Global Data service is to assign a Global Data multicast IP address/Group Name in the Network properties section and configure the global variables properties.
For your Global Data variable you need to select either to PUB (publish) or SUB (subscribe), assigned a Group Name (setup in the network properties section) and enter a unique ID number. (see page 122). The Global Data protocol is a Schneider Electric proprietary capability.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Publikované pre: Schneider Electric Slovakia
Potrebujete pomoc?
Výber produktov
Rýchlo a jednoducho nájdite tie správne produkty a príslušenstvo pre vaše aplikácie.
Získať ponuku
Kontaktujte nás online a náš odborník sa s vami spojí.
Kde nakúpiť?
Jednoducho nájdite najbližšieho distribútora produktov Schneider Electric vo vašom okolí.
Centrum podpory
Nájdite zdroje podpory pre všetky vaše potreby na jednom mieste.
