{}
搜尋常見問題
How do I zero out a block of registers using IEC in Concept 2.2 and above ?

To zero out a block of registers using IEC in Concept 2.2 and above use a block called IEC_BMDI that can perform this function. The block was designed to move a source block to a destination block. This can be used to zero out registers. This block is comparible to the BLKM instruction in 984LL. It is located in the LIB984 of the FFB Library.


施耐德電機Taiwan

探索更多
系列:
可能有幫助的文章
探索更多
系列: