Error “Impossible to create a new DTM object” is displayed adding a Sepam40/60/80 DTM in Control Expert V14.0.
After installing the Generic Modbus DDXML DTM library SV 2.03 and updating the DTM Catalog we can see that Sepam40, Sepam60 and Sepam80 DTMs (SV 02.08) are present.
Problem is that with the Ecostruxure Control Expert V14.0 when one of these three references is added the error message “Impossible to create a new DTM object” is displayed.
This is a known issue and a specific Control Expert HF will be published soon, ControlExpert_V140_HF0507367R.
Note: Other Devices DTMs coming with this Generic Modbus DDXML DTM library SV 2.03 are not concerned by this FAQ.
Problem is that with the Ecostruxure Control Expert V14.0 when one of these three references is added the error message “Impossible to create a new DTM object” is displayed.
This is a known issue and a specific Control Expert HF will be published soon, ControlExpert_V140_HF0507367R.
Note: Other Devices DTMs coming with this Generic Modbus DDXML DTM library SV 2.03 are not concerned by this FAQ.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。