Setup the ATV340 Drives Ethernet IP address using the optional remote keypad display.
Issue:
ATV340 programming setting up the Ethernet IP address using optional HMI.
Product Line:
ATV340 with optional keypad VW3A1113 or VW3A1111.
Environment:
All
Cause:
Programming setup Ethernet IP address
Resolution:
This programming example is if you use one of the optional keypad to program your drive.
[Communication] -[Comm parameters]- [Embd Eth Config]
-[Embd Eth Config] EtE- Menu
PAn= Add a Device name
iNOO= IP mode set to NAnu or Fixed
iCO= IP Address (IC01, IC02, IC03, IC04).
iNO= Subnet mask (IM01, IM02, IM03, IM04).
iGO= Gateway address (IG01, IG02, IG03, IG04).
After setting up your IP address and subnet address etc you will need to power cycle the drive.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。