How to eliminate Control Expert 15.0 SP1 Fatal error when upgrading M340 firmware from V2.40 to V2.70
Control Expert 15.0 SP1 reports Fatal error when upgrading M340 firmware from V2.40 to V2.70..
The validated workaround is
• Open STA file
• Export application as ZEF file
• Open this ZEF file
• Perform the replace CPU from V2.40 to V2.70 (no errors because COBID not yet performed)
• Rebuild the application
• Save STA – new STA is with V2.70 CPU
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。