Powerlogic P7 - No Voltage Display Using Open Delta PT Scheme and 52A signal Not Responding
Issue:
The customer reports that voltages are not displayed and the 52B input status is missing on the mimic panel.
Product:
PowerLogic P7 Relay
Environment:
Relay configured with an Open Delta PT scheme and local HMI mimic panel enabled.
Cause:
The mimic configuration was not properly updated to reflect the PT scheme and input status, causing the local HMI to show incomplete or incorrect data.
Resolution:
Update the mimic configuration to ensure the local HMI is properly animated. Below are the recommended settings and layout adjustments:
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。