How do I connect to the Edge I/O Network Interface Module via USB connection
Issue:
USB connection to the Edge I/O NIM
Product Line:
Edge I/O
Resolution:
The USB Port connection is suitable for short-duration connections for the express purposes of configuration, maintenance, and troubleshooting. It is not intended as a long-standing connection for other purposes. Further, the network interface module may only be connected to a PC.
Note: The communication cable should be connected to the PC first to help minimize the possibility of electrostatic discharge affecting the network interface module
To connect the network interface module to the PC, do the following:
You must configure a virtual Ethernet Link on your USB port, before you can access the network interface module through USB.
To configure a virtual Ethernet Link, configure an Ethernet interface of the USB-RNDIS by following the steps below:
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。