The SR1CBL01 is the programming cable to be use with the Zelio Relay SR1.
To be able to connect first generation Zelio programmable relays (part number SR 1xx) to a PC supporting the ZelioSoft programming software (part number SR1SFT01) you must have the SR1CBL01 programming cable.
The wiring diagram is as follows: Zelio connector end: brown: 2, yellow: 7, red: 3, orange: 5. PC SubD9 end: brown: 7, yellow: 2, red: 3, orange: 5.
Please Note: This cable and configuration is for the Zelio Logic First Generation - These items will not work with SR2 devices, Zelio Logic 2, or Zeliosoft2 Programing Software.
*********************************************************NOTE*******************************************************************
The Zelio SR1 software , devices and modules are discontinued. Please check the Zelio Smart Relay SR2 or SR3.
***********************************************************************************************************************************
To be able to connect first generation Zelio programmable relays (part number SR 1xx) to a PC supporting the ZelioSoft programming software (part number SR1SFT01) you must have the SR1CBL01 programming cable.
The wiring diagram is as follows: Zelio connector end: brown: 2, yellow: 7, red: 3, orange: 5. PC SubD9 end: brown: 7, yellow: 2, red: 3, orange: 5.
Please Note: This cable and configuration is for the Zelio Logic First Generation - These items will not work with SR2 devices, Zelio Logic 2, or Zeliosoft2 Programing Software.
*********************************************************NOTE*******************************************************************
The Zelio SR1 software , devices and modules are discontinued. Please check the Zelio Smart Relay SR2 or SR3.
***********************************************************************************************************************************
Released for:Schneider Electric UK
