Yes, the ACW6 pressure switch of the 9012 range is no longer available.
The alternative will depend on the desired set point.
The ACW6 had a range setting of 5.4..34 bar so it can be replaced by either:
- ACW2 if set point below 20 bar
- ACW7 if set point above 20 bar
Below are the full specs of the three units:
The alternative will depend on the desired set point.
The ACW6 had a range setting of 5.4..34 bar so it can be replaced by either:
- ACW2 if set point below 20 bar
- ACW7 if set point above 20 bar
Below are the full specs of the three units:
Released for:Schneider Electric UK
