Why do the drawings in the ATS48 Installation Guide show 2 fuses on CL1,CL2 terminals?
Resolution:
It is not necessary to install two fuses on the CL1 and CL2 terminals of the ATS48.
Only one fuse is required for the control power circuit. The drawings in earlier versions of the ATS48 Installation Guide may show two fuses; however, updated documentation reflects the correct configuration.
Please refer to the attached ATS48 Catalog for the latest and corrected drawings.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Released for: Schneider Electric USA
