Video: How do I change from ramp stop to freewheel stop on the ATV61 and ATV71 drives?

Resolution:

• Go into the Application menu 1.7
• Enter Stop configuration
• Enter " type of stop"
• Change SST (type of stop) value to NST and enter.

Additional resources (attached):  ATV71 programming manual and ATV61 programming manual.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for: Schneider Electric USA