Why Does the ATV61 or ATV71 HMI Display a Frequency Range of -500 Hz to +500 Hz?
Resolution:
When the ATV61 or ATV71 is in HMI Frequency Reference mode, the minimum (-500 Hz) and maximum (+500 Hz) frequency values displayed on the HMI represent the drive's internal operating limits.
These displayed values do not reflect the user-configured Low Speed and High Speed settings. Even though the HMI shows the full drive frequency range, the drive will continue to operate according to the Low Speed and High Speed limits programmed by the user.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric USA
