Which contact blocks are used with XAL control stations?
Issue:
XAL Control Station contact blocks
Product Line:
Push Buttons and Operator Interface
Environment:
XAL Control Stations
Cause:
It is unclear which contact blocks are used in 22mm control stations
Resolution:
The ZENL contact blocks are used in these control stations. These blocks mount directly to the control station itself and do not use a mounting collar. A normally open contact block is ZENL1111, and a normally closed contact block is ZENL1121.
These contact blocks are rated 10 amps max, AC-15 A600 and DC-15 R300
XAL Control Station contact blocks
Product Line:
Push Buttons and Operator Interface
Environment:
XAL Control Stations
Cause:
It is unclear which contact blocks are used in 22mm control stations
Resolution:
The ZENL contact blocks are used in these control stations. These blocks mount directly to the control station itself and do not use a mounting collar. A normally open contact block is ZENL1111, and a normally closed contact block is ZENL1121.
These contact blocks are rated 10 amps max, AC-15 A600 and DC-15 R300
Released for: Schneider Electric USA
