Where Are the DC Bus Connections Located on an Altivar 61 (ATV61) Drive?

Resolution:

The DC bus connections on an ATV61 drive are identified as:

• PA/+: DC bus positive (+)
• PC/-: DC bus negative (-)

Depending on the ATV61 model, these terminals may be located with the main power terminals (L1, L2, L3 and T1, T2, T3) or near the DC choke terminals at the top of the drive.

Refer to the ATV61 installation manual attached extracts for the terminal location and wiring information specific to your drive model.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for: Schneider Electric USA