What is the part number for the deadfront trim screw used on the NEMA 3R QO and Homeline load centers?

Issue:
Current design repair parts

Product Line:
QO and Homeline load centers

Resolution:
The standard deadfront trim screw is part number 4020513001K, which is a bag of 10 screws. This is the 1/2" long screw used for ALL the QO and Homeline NEMA 3R deadfront trims.

The actual NEMA 3R door/cover mounting screws are different and need to be obtained from the load center repair parts list FAQ for each load center catalog and series number.

The standard NEMA 1 QO and Homeline Cover screws are part number 4020513002K, which is a bag of 10 screws. This is the 3/4" long screw used for ALL the QO and Homeline NEMA 1 covers.

NOTES:
1) Both the above 3/4" and 1/2" screws have the exact same thread and can be use for either the NEMA 1 cover and/or the NEMA 3R deadfront trim if needed.
2) Square D does NOT offer a cover screw longer than the 3/4".

Released for:Schneider Electric USA