How to resolve the SCADAPack Workbench 6.4 installation error Does not Detect VS2010 SP1?

Question

Accepted Answer

Work around is the following to resolve the issue in figure 1 below:

1. Run..\Workbench\Prerequisites\VS2010ISO\English\Isolated Mode\setup.exe. When prompted, select remove
2. Run it again, this time go through the full install
3. Run Setup.exe from the root of the DVD and installation SPW

How to resolve the SCADAPack Workbench 6.4 installation error Does not Detect VS2010 SP1?

Released for: Schneider Electric USA

Support

Company

Product Resources

Quick Links

APC
opens new tab

ASCO
opens new tab

Square D
opens new tab

Accessibility
opens new tab

How to resolve the SCADAPack Workbench 6.4 installation error Does not Detect VS2010 SP1?

Released for: Schneider Electric USA

Support

Company

Product Resources

Quick Links

APC:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

ASCO:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Square D:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Accessibility:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

APC
opens new tab

ASCO
opens new tab

Square D
opens new tab

Accessibility
opens new tab