Issue:
Why does the LC1F1700 use two coils
Product Line:
IEC Contactors - GIC Product
Environment:
US Product
Cause:
Product specifications
Resolution:
Two coils are used to balance the device as it is too long for a single coil. Both coils are wired in series at roughly half (or slightly less) of the control voltage used so that the voltage is split evenly between the two coils.
Why does the LC1F1700 use two coils
Product Line:
IEC Contactors - GIC Product
Environment:
US Product
Cause:
Product specifications
Resolution:
Two coils are used to balance the device as it is too long for a single coil. Both coils are wired in series at roughly half (or slightly less) of the control voltage used so that the voltage is split evenly between the two coils.