How to put a security seal on PLM enclosure type NSYPLMxxV
To put a security seal on the PLM enclosure type NSYPLMxxV follow the next operating mode :
1) Close the door.
2) Remove the key.
3) Rotate the plastic cap.
4) Introduce the security seal in the hole on the bottom of the handle.
5) Lock the security seal.
See also attached file.
1) Close the door.
2) Remove the key.
3) Rotate the plastic cap.
4) Introduce the security seal in the hole on the bottom of the handle.
5) Lock the security seal.
See also attached file.
Released for: Schneider Electric USA
