What will cause a CLr fault on the ATV212?
Issue:
Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults:
Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults:
Released for: Schneider Electric USA
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.