The ZBE101 and ZBE102 contact blocks can be used on the back of our selector switches, see the tables below to see what configurations can be achieved.
| 2 position selector switch |
| Left Side Operation | Right Side Operation | Contact block guide |
| O | X | 1 N.O. (left or right) |
| X | O | 1 N.C. (left or right) |
| 3 Position Selector Switch |
| Left Side Operation | Center Operation | Right Side Operation | Contact Block Guide |
| O | O | X | 1 N.O. (left) |
| X | O | X | 2 N.O. wire in parallel (side by side) |
| X | O | O | 1 N.O. (right) |
| O | X | X | 1 N.C. (right) |
| X | X | O | 1 N.C. (left) |
| O | X | O | 2 N.C. wired in series (side by side) |
* O indicates a contact being in the open state, X indicates a contact being in the closed state
Released for: Schneider Electric USA
