How to test the Conext SW remote Switch 865-1052?
Issue: Conext SW Remote switch testing and startup
Product Line:
Conext SW Inverter/charger, Conext SW Remote Switch 865-1052
Environment:
Applications that use a Conext SW4024 with remote switch
Cause:
Remote Switch is not working
Resolution:
Startup and Test To Start up and Test the CONEXT SW REMOTE SWITCH:
1. Enable inverter mode on the inverter/charger's front panel by pressing the Inv Enable button.
2. Verify that the Inv Enabled LED is turned on from the inverter/charger's front panel.
3. Verify that the indicator light is turned on from the REMOTE SWITCH.
4. Press the Inverter Enable button on the REMOTE SWITCH to disable inverter mode. Press it again to enable inverter mode
See attached document for more detail
Product Line:
Conext SW Inverter/charger, Conext SW Remote Switch 865-1052
Environment:
Applications that use a Conext SW4024 with remote switch
Cause:
Remote Switch is not working
Resolution:
Startup and Test To Start up and Test the CONEXT SW REMOTE SWITCH:
1. Enable inverter mode on the inverter/charger's front panel by pressing the Inv Enable button.
2. Verify that the Inv Enabled LED is turned on from the inverter/charger's front panel.
3. Verify that the indicator light is turned on from the REMOTE SWITCH.
4. Press the Inverter Enable button on the REMOTE SWITCH to disable inverter mode. Press it again to enable inverter mode
See attached document for more detail
Released for: Schneider Electric USA
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.