Browse FAQs

Which version of Vijeo Designer supports the HMIDT752 and HMIDT952?

Published date: 29 June 2020

Issue:

What version of Vijeo Designer supports the HMIDT752 and HMIDT952 screens for the  Harmony (formerly known as Magelis) HMIGTU series?

 

Product Line:

Vijeo Designer, Harmony (formerly known as Magelis) HMIGTU

 

Resolution:

The HMIG5U2 is the current HMI CPU/Motherboard rear module in Vijeo Designer v6.2 that supports the HMIDT752 (15" Wide) and HMIDT952 (19" Wide) Touchscreens (as of August 2019).

Vijeo Designer v6.2 Service Pack 9 provides the HMIG3U the ability to use these touchscreens.

See the Table below for HMIGTU series support for these screens for each Vijeo Designer v6.2 Service Pack:
 

Model Service Pack 6 or older Service Pack 7 Service Pack 8 Service Pack 9
HMIG2U N/A N/A X X
HMIG3U X X X O
HMIG5U X X X X
HMIG5U2 X O O O

 
Legend:
N/A - HMIG2U not introduced yet in this Service Pack

X - does not support the HMIDT752 or HMIDT952
O - supports the HMIDT752 or HMIDT952

Note:
In EcoStruxure Operator Terminal HMI configuration software (versions: Vijeo XD v3.0 or EcoStruxure Operator Terminal Expert v3.1+), both the HMIG3U and HMIG5U2 can use the HMIDT752 and HMIDT952 displays.
This is a different configuration software than Vijeo Designer.


Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.